I am in the tender place at my age (over 45!) where I am in no way ready to go under the knife (physically, emotionally, technically, financially) for my face but HOLY SHIT IF GRAVITY ISN’T BULLYING THE CRAP OUT OF ME RIGHT NOW!
I’ve waited months to post about PROFOUND. I wanted to give it the close to 6 months that it takes to fully take effect so I could honestly evaluate it.
When I first caught wind of this procedure, I immediately perked up. It sounded like the perfect pre-face-lift type of procedure for me. But I needed to find the right doctor.
Enter: Dr. Ben Talei,Board Certified. Dual Fellowship Trained. Facial Plastic Surgeon.
In other words, The Man. Dr. Talei is taking this town by storm and it’s clear why – he’s a prodigy. His accomplishments at such a young age, will make you feel like a major loser. Then there’s his skill. If there is such a thing as an It Facelift Doctor, he’s the one.
Back toProfound,by Syneron-Candela,The latestskin tightening technology.
We all know I am not a fan of Ulthera and there is only so much that lasers and peels can do.I needed to address the deep DEEP layers and it’s either surgery or….this.
Ok, below is lot of tech stuff I pulled from the interwebs – but let me fill you in on my experience.
The shit is no joke. There is no pain but there is a recovery to deal with. Many doctors will downplay the bruising and recovery – but let me tell you,there’s some downtime. For me it was a good two weeks of major bruising. If you are mentally prepared for this – then great. But doctor’s will often shuck this off very casually. Dr. Talei was cool – and said you’re going to bruise. Still, I was not prepared. Suffice to say, you’ll look like you went sky diving and your shoot did not open. Your face will swell, then go down, then puff up like a blow fish. In my case, you might have little round bumps on your face, like an ostrich, for a few months (rare – but it happened to me). And still – it was worth it.
Yup. My face was a wreck for a good while. But five months out – the overall results are in. I am tighter, lifted and glowing. And I thrilled I held off on this write up until now – because I really gave it the time to do its magic. Ok, take a read of this jargon below.
It’s in the thousands – but way less than surgery, that’s for sure.
You will LOVE – as in fall in love so watch out – the adorable and divine Dr. Talei. And his new office is apparently insanely stunning.
WHAT:Profound usesRF Microneedling todeliver RF energy at regulated temperatures to precise points under theskin:
- 1st device to create all 3 skin fundamentals: Elastin. Collagen. Hyaluronic Acid.
- Yields 100% response* for total patient satisfaction
- Heats the adipose tissue and remodels the septae
- Both Dermal & Adipose Tissues
- Profound Contour
- Profound Lift
- Profound Smooth
- Wrinkles
- Single treatment procedure with a 100% response*rate
- Treats jawline, jowls, wrinkles and other textural considerations
- A comprehensive treatment forDermal & SubQ layers
- Yields predictable results with complete control over depth, temperature and time of treatment
The Science of Profound
Unlike other RF devices,Profound is unique is it’s ability to control the exact temperature of the skin as the RF energy is being applied.
WHY HEAT? In simplest terms,controlled damage to the under layers of the skin promotes the growth of collagen. Profound uses heat to do this. When the under layers of the skin are heated to 65°C(149°F), neocollagenisis begins which is whencollagen comes in contact with the heatand begins to denature or constrict.
When this happens we have less sagging skin and our wrinkles begin to smooth out.Keep in mind that the miracle of collagen growth takes time and you won’t see the initial change for 4 to 10 weeks and the ultimate results for anywhere from 3 to 6 months.
Studies have found that the sweet spot to partially denature collagen isby heating the area to67°C(152.6°F) and to maintain that heat for4 seconds at a time between2 to 4mm under the skin– with no variation.
Seems easy enough but therewasnothing out there that could pinpoint the heat and control the temperature in order to produce the ideal conditionsfor partially denaturing collagen. Instead, they heat a general area of the skin with wavering temperatures in order to protect the outer layers of skin.
But regardless, most don’t even reach the optimal 67°C(152.6°F). The temperature varies up and down and that’s not the ideal for partially denaturing collagen. Until Profound.
Profound is the only unit that uses RF Energy to heat the area, microneedles to pinpoint the exactdepth, protecting the outer layer of skin, and a patented Real Time Temperature Control algorithm to meet the ideal temperature.
Recent studies have found that a single treatment produced a profound increase in elastin and collagen 4 to 10 weeks after the treatment with a 95% response rate for laxity at 6 months after treatment:
Before and 3 Months After Profound Skin Tightening Treatment
Before and 6 months after One ProfoundSkin Tightening Treatment
Profound for skin tightening treatment takes 45 minutes or less. Your doctor will slather on a local anesthetic and once your numb shewill use a handheld unit to apply teeny little pore sized needles into your skin, pulsing heat 4 seconds at a time.
Profound is delivered in a single treatment, typically lasting 45 minutes duration for one treatment area. The patient is given local anesthesia to ensure comfort during the procedure. Once the anesthesia is effective and the skin is numb, the Profound treatment begins. Twelve (six pairs) high-tech silicone-coated needles are inserted into the skin. Each pair of needles has an uncoated tip, sending radiofrequency current between the tips of the needles.
The radiofrequency current travels between the needles, creating heat over the targeted dermal tissues. The heat tightens lax skin by stimulating production of collagen and elastin fibers. The silicone coating over the remainder of the needle protects the overlying skin from any damage, so only the targeted area is treated.
Because the procedure is done under local anesthesia, there is no pain. The needles are so small that there is no bleeding. The computer controlled needles heat the dermis layer of skin to the exact right temperature and time duration to stimulate collagen and elastin production. This production leads to the lifting and tightening of the skin. Each are of laxity is treated as a zone, with 30-40 minutes necessary for each region. For a full facial rejuvenation, many patients opt to have the procedure performed over the skin of the neck, cheeks and around the eyes and eyebrows.
info@beverlyhillscenter.com
(310) 288-0641
Beverly Hills Center for Plastic & Laser Surgery –
465 N Roxbury Dr, #750
Beverly Hills, CA 90210
Phone: (310) 288-0641
DR. BEN TALEI
Academic Path
A native of California, Dr. Benjamin (Ben) Talei graduated from the University ofCalifornia, Los Angeles (UCLA) with a degree in Physiological Sciences receiving both College andDepartmental Honors. While studying at the University of Menedez Pelayo in Spain,Dr. Talei worked for the Sisterhood of Blood Donorsand the Red Cross promotingblood donations in Andalucia, Spain.
He then received his Medical Degree at one of the nation’s top medical schools –University of California, San Diego School of Medicine (UCSD). Dr. Talei was nominated tothe Gold Humanism Honor Society after having donated immense amounts of timeand energy to the free clinic in San Diego along with other charitable foundations.
Dr. Talei then completed his residency training inHead & Neck Surgery at ColumbiaUniversity and Cornell University Medical Centers,New York Presbyterian Hospital. There he worked with the Greats of Facial Plastic Surgery included his primarymentor Dr. Steven Pearlman. He then served as Chief in his residency at Columbiaand Cornell and served as a fellow at Memorial Sloan Kettering Cancer Center also inNew York City.
Following his residency training, Dr. Talei becameone of the only surgeons in thecountry to complete two separate fellowships in Facial Plastic & ReconstructiveSurgery. First he completed one of the most revered and prestigious fellowships inthe country at the New York Center for Facial Plastic & Laser Surgery. Simultaneously he offered his skillsand training while serving asvoluntary staff and teacher for the Resident Head &Neck Surgeons of the AlbertEinstein School of Medicine. Dr. Talei then furthered his training with Dr. MiltonWaner at the Vascular Birthmark Institute of New York, a part of Lenox Hill andManhattan Ear, Eyes and Throat Hospitals. There he treated the most rare anddevastating Vascular Birthmarks & Congenital Anomalies while refining histechniques in Pediatric Facial Plastic Surgery.
Integrated fully into the Beverly Hills community, Dr. Talei is a member of theBeverly Hills Health & Wellness Committee. He is also on staff atUCLA Ronald Regan Medical Center, Santa Monica UCLA Medical Center, Cedars-Sinai Medical Center,andChildren’s Hospital of Los Angeles. Outside of the hospital, Dr. Talei is the Advisory Chair for theLos Angeles County Medical Association (LACMA).
Dr. Talei is also an avid author and speaker. He has been invited to speak at nationalmeetings and has contributed significantly to medical literature with his researchand publications in medical journals and textbooks. His publications onAdvanced Face and Neck LiftingTechniques andRevision Rhinoplastyare used to teach doctors nationwide. As a sub-specialist in Deep Plane Facial Rejuvenation & Facelifting and Minimally Invasive Rhinoplasty, Dr. Talei frequently accommodates visiting surgeons in order to teach them more advanced surgical techniques. TheModified Upper Lip Lift is also a procedure pioneered and perfected by Dr. Talei as he performs more than any surgeon in the world. He is most well known for his rapid healing times, very natural, long-lasting results and impeccable facial aesthetic. Dr. Talei has a dedicated expertise to the Face and has been featured on E! News,Fox, NBC, and Inside Edition amongst a host of other editorials.
FAQs
What is the most cutting edge technology? ›
Artificial Intelligence (AI) is one of the most cutting-edge technologies in software development today.
What is the latest cutting edge technology 2023? ›By 2023, we can expect to see cutting-edge technologiessuch as artificial intelligence (ai), augmented and virtual reality, cloud computing, 5G internet,and blockchain technology becoming more widely available and deeply embedded into our everyday lives.
What are all the cutting edge technology? ›Cutting-edge technology refers to the latest and most advanced tools, techniques, and platforms that are currently available in the software development industry. The term is sometimes contrasted with “bleeding-edge,” which refers to technologies that are so new that they aren't quite ready for mass adoption.
What are the cutting edge technologies for sustainable development? ›Cutting-edge technologies like big data analytics (BDA), artificial intelligence (AI), quantum computing, blockchain, and digital twins have a profound impact on the sustainability of the production system.
What is an example of cutting edge? ›The adjective cutting-edge often describes new advances in science or technology — a hospital might advertise its use of cutting-edge cancer treatments, for example. Art can be described as cutting-edge as well, if it uses innovative techniques or does something completely new.
What is the meaning of cutting edge in business? ›the most modern stage of development in a particular type of work or activity: a company at the cutting edge of mobile communications technology.
What is the next big thing in tech 2023? ›Artificial intelligence will become more prevalent in 2023 with natural language processing and machine learning advancement. Artificial intelligence can better understand us and perform more complex tasks using this technology. It is estimated that 5G will revolutionize the way we live and work in the future.
What companies are creating cutting edge technology? ›- Amazon Web Services. AWS edge computing works well for those in the industrial and commercial markets. ...
- Cisco. ...
- ClearBlade. ...
- Dell Technologies. ...
- Equinix. ...
- FogHorn. ...
- Google Cloud Platform. ...
- Hewlett Packard Enterprise.
The rise of next-gen technologies like private wireless, edge computing and cloud networking in 2023 will allow more enterprises to modernize their network strategy and rapidly evolve networks to meet changing business needs.
What is new edge technology? ›Edge computing is an emerging computing paradigm which refers to a range of networks and devices at or near the user. Edge is about processing data closer to where it's being generated, enabling processing at greater speeds and volumes, leading to greater action-led results in real time.
Which cutting edge technology caused the most change to our daily lives? ›
Artificial intelligence – simulating human intelligence in machines – used to be confined to science fiction. But in recent decades, it's broken into the real world, becoming one of the most important technologies of our time.
What is another name for cutting edge technology? ›Cutting edge is also known as leading-edge technology or state-of-the-art technology.
What is some new and cutting edge technology? ›One of the biggest areas of advancement in cutting edge technology is artificial intelligence (AI). AI is a type of computer programming that allows machines to think and act like humans. It has been used for a variety of applications such as facial recognition, natural language processing, and machine learning.
What is the opposite of cutting edge technology? ›Cutting edge means-highly advanced; innovative or pioneering and the correct antonym is option (a) i.e., conventional.
What is cutting edge supply chain? ›Using cutting-edge technologies in the supply chain
Companies use technology in their supply chain to automate their processes. This reduces sources of error, eliminating the need to manually transfer information between systems, or even paper-based steps.
It is a company that uses cutting-edge technology, employs highly qualified workers and promotes research. That is cutting-edge technology, and we all have much to learn from it. That money will refurbish the buildings and install cutting-edge technology so that people in my community can learn directly.
Why is cutting edge important? ›This means that a tool needs to be processed at least some time to improve also the surface quality. the cutting edges, improves the quality of the tool and its lifetime. The ideal rounding should increase with faster feed rates.
What makes something cutting edge? ›As an adjective 'cutting edge' refers to something that is the newest, most advanced of its kind. "This new invention is cutting edge technology."
What is the fastest growing technology in the world? ›Quantum computing, with a processing ability that is much faster than classic, linear computers, is a fast-growing, next-generation technology that creates multi-dimensional computing spaces for algorithms to solve intricate problems and detect delicate patterns.
What is best tech stocks to buy 2023? ›| Company and ticker symbol | Performance in 2023 |
|---|---|
| NVIDIA (NVDA) | 159.1% |
| Advanced Micro Devices (AMD) | 82.5% |
| Salesforce (CRM) | 68.5% |
| Lam Research (LRCX) | 46.7% |
What's the next big invention? ›
Virtual reality (VR) and augmented reality (AR) are not new concepts but will revolutionize the world within 5 years. AR enhances reality while VR helps us forget it. Together, they open a world beyond reality, the internet or the internet of things; a new industry, the internet of experiences, is emerging.
Who is leading in edge computing? ›| Company | IoT, ML, and AI at the edge | Security |
|---|---|---|
| Azure | ✔ | ✔ Activation keys, passwords, certificates, double encryption, and restricted access |
| ClearBlade | ✔ | ✔ API access encryption, authentication, and authorization |
| Dell | ✔ | ✔ |
| EdgeConneX | ✔ | ✔ |
John Degen - CEO - Cutting Edge Network Technologies | LinkedIn.
What is the bleeding edge technology? ›What Is Bleeding Edge Technology? Bleeding edge technology is a type of technology released to the public even though it has not been thoroughly tested and may be unreliable. Bleeding edge technology usually comes with a degree of risk and expense for the end-user—in most cases, the consumer.
What will replace WIFI in the future? ›There is also the possibility of data transmission through light. Li-Fi experiment where data transfer is done by light which is much faster compared to wifi. Edinburgh University Professor of Mobile Communications Harald Haas coined the term Li-Fi in 2011, a technology that uses LED lights to transmit data.
What will be the new technology in 2050? ›According to Forbes, by 2050, IoT technology will be in 95% of electronics for new product designs. And by 2050 it is expected to have everything connected to the cloud and to the internet. According to Business Insider, Space tourism could be feasible in 2050, but likely only for the very wealthy.
What technology will we have in 2026? ›In 2026, a number of technology breakthroughs and trends will become available to the public, for example: Between 2022 to 2026, the worldwide shift from smartphones to wearable augmented reality (AR) glasses will begin and will accelerate as the 5G rollout is completed.
What is edge instead of 5G? ›5G increases speeds by up to ten times that of 4G, whereas mobile edge computing reduces latency by bringing compute capabilities into the network, closer to the end user.
What is smart edge technology? ›Intel® Smart Edge is a Kubernetes-based, edge computing platform for deploying edge networks and delivering multi-access edge computing (MEC) for applications, containers, and virtual machines. It's wrapped in a user-friendly platform designed to give nontechnical users the keys to their own edge computing platform.
What is 5G edge computing? ›Edge computing, combined with 5G, creates opportunities to enhance digital experiences, improve performance, support data security and enable continuous operations in every industry. Edge computing brings computation and data storage closer to where data is created by people, places and things.
What is the most impactful technology? ›
We called those with the most potential the Essential Eight. They include: artificial intelligence (AI), augmented reality (AR), blockchain, drones, Internet of Things (IoT), robotics, 3D printing and virtual reality (VR).
What technology has changed the most? ›- The Wheel. It's pretty hard to argue that the wheel isn't one of the biggest engineering marvels the world has ever seen. ...
- Electricity (Battery) ...
- Automobile. ...
- Lightbulb. ...
- Transistors. ...
- The refrigerator. ...
- Television. ...
- The Computer.
Internet. Many people consider the internet to be the most popular and powerful communication technology.
What is the person of the tool on which cutting edge is formed called? ›The portion of the tool on which the cutting edge is formed is known as the shank.
What is a synonym for cutting edge innovation? ›On this page you'll find 315 synonyms, antonyms, and words related to cutting-edge, such as: contemporary, ingenious, inventive, new, original, and avant-garde.
What is the tool having one cutting edge known as? ›Turning tool, also known as Single Point Turning Tool (SPTT), is the perfect example of a single point cutter. SPTT has only one main cutting edge (called Principal Cutting Edge) arises from the intersection of rake surface and principal flank surface.
What is an example of leading-edge technology in business? ›Many businesses are already taking advantage of leading-edge technologies that reduce costs while boosting productivity. Cloud collaboration platforms, AI chatbots and voicebots, automated mobile marketing platforms and digital training and onboarding are some examples of resources that cut time and costs.
What is cutting edge artificial intelligence? ›Cutting Edge AI allows us to customize our video AI analysis and generate relevant insights for senior leadership. “ Jacob. Safety & Security Support Service Coordinator at Fortune 500 supply chain technology company.
Is bleeding edge technology better than cutting edge technology? ›What Is the Difference Between Cutting Edge and Bleeding Edge? Bleeding edge refers to technology that is further ahead than cutting-edge or leading-edge technology. It is technology that is so new and advanced that it is still unproven, could carry risks, and may not perform as intended.
What is the closest synonym for the word innovative? ›- contemporary.
- ingenious.
- inventive.
- new.
- original.
- avant-garde.
- breaking new ground.
- cutting-edge.
What is the difference between cutting edge and leading edge? ›
“Cutting-edge” and “leading-edge” are both adjectives used (especially in product promotional materials and corporate “mission statements”) to mean “At the forefront or most advanced stage of development; highly innovative or pioneering.” Both are also used as nouns (without the hyphens) to mean that highly-advanced ...
What is a synonym for leading edge? ›On this page you'll find 27 synonyms, antonyms, and words related to leading edge, such as: cutting edge, forefront, vanguard, front, front edge, and point.
What are the different types of cutting edge? ›A cutting tool may have one or more cutting edges, and therefore, it can be classified into three categories—single point, double point and multi-point cutting tools.
Is bleeding-edge better than Cutting Edge Tech? ›What Is the Difference Between Cutting Edge and Bleeding Edge? Bleeding edge refers to technology that is further ahead than cutting-edge or leading-edge technology. It is technology that is so new and advanced that it is still unproven, could carry risks, and may not perform as intended.
What companies are on the cutting edge of AI? ›Google, Amazon, Microsoft, Facebook, Apple, Alibaba, Baidu, Salesforce, Intel, and IBM are all leading-edge AI companies pushing this technology's boundaries. Google has invested heavily in the development of edge AI technology with its Edge TPU chips and ML Kit platform.
What is leading edge vs trailing edge technology? ›These two types of phase cutting dimmer get their names from the part of the AC wave that they cut off. Leading edge dimming cuts of the front edge of each waves' half cycle. Conversely trailing edge dimming cuts out the second half of each waves' half cycle.
What is the most advanced technology on earth? ›The most important Advanced Technology Trend for 2023 is the prominence of Artificial Intelligence (AI) and AI-based solutions.
What is the most important technology in the world? ›Microsoft co-founder Bill Gates says the development of artificial intelligence (AI) is the most important technological advance in decades. In a blog post on Tuesday, he called it as fundamental as the creation of the microprocessor, the personal computer, the Internet, and the mobile phone.
What is the quote about cutting edge technology? ›Technology is an enabler; you have to be at the cutting edge of technology - there is no choice.
Why did Bleeding Edge fail? ›In Bleeding Edge, healing becomes incredibly boring when: (1) there are no cast times or any concept of resource management; (2) positioning doesn't matter due to the abundance of mobility and lack of abilities that are avoidable either by positioning or some form of counter; and (3) each healer only has 1 healing ...
Is cutting edge and leading edge the same? ›
Leading and innovative IT industry organizations are often referred to as "cutting edge." Cutting edge is also known as leading-edge technology or state-of-the-art technology.
How powerful is bleeding edge? ›Stark's Bleeding Edge armor is extremely powerful. It could self-repair when damaged, was practically invulnerable, and could be restored in seconds when destroyed. Stark literally made the suit a part of his body. His transformation when wearing the suit was incredibly cool, but also disgustingly gross.
Which company has the most powerful AI? ›IBM Cloud. IBM is a leader in the field of artificial intelligence. Its efforts in recent years center around IBM Watson, an AI-based cognitive service, AI software as a service, and scale-out systems designed for delivering cloud-based analytics and AI services.
Who are deep 6 AI competitors? ›- Autonomize.
- Deep Lens.
- Massive Bio.
- Dyania Health.
- Maya AI.
- Ancora.
- TriNetX.
- Illumicare.
Over the next ten years, AI is expected to become increasingly sophisticated and complex. Technical advancements in this field will likely focus on creating general intelligence that rivals or surpasses human capabilities.
What are the most common types of leading edge? ›The leading edge slat is the most common leading edge device in wide use. The leading edge slat is analogous to the slotted trailing edge flap in that the slat and the remainder of the airfoil form a two-element airfoil with all the advantages described at the beginning of this section.
What is leading edge signal? ›The leading edge (or front edge) is the first edge of the pulse. The trailing edge (or back edge) is the second edge of the pulse.
What is the leading edge falling edge? ›The voltage level of the top of the pulse with respect to the ground is the pulse amplitude. The first edge of the pulse at t = 0 (say) is called the leading edge, the rising edge or positive going edge. The second edge, at t = T 1, is called the trailing edge, the falling edge or the negative going edge.